Plastering plasterboard which side




















The crucial difference is that a skimmed plasterboard wall will appear smooth and glossy. In the end, plastering a wall is all about creating a decorative surface that improves the durability of the structure, and conceals the original masonry. The Logic Plastering team take great pride in applying their professional skills both in period properties, and in new builds. The pleasure of seeing a newly finished wall, perfectly plastered and without blemish is one which never fades.

Our Bedfordshire clients expect us to be perfectionists in all we do, and this is one very visible way that we can demonstrate our professionalism. How thick should dot and dab be? Can I form an opening in Gyproc plasterboard? How do I install Gyproc plasterboard? Installing Gyproc is similar to installing other types of plasterboard. You will need to carry out the following steps.

Mark the ceiling and floor to show the thickness of the board and adhesive. Also mark where the centre of each board will be. Cut the plasterboard to the required dimensions. Apply the plasterboard adhesive in a continuous band around the edges of the wall, ceiling, and any services or openings.

Dab the adhesive onto the wall, behind where the board will sit. Also apply a band of adhesive at skirting level. Place the reverse side of the board against the dabs, and tap it into alignment with the marks you made at the beginning. Related Close. White Book For all partitions, wall lining and ceiling systems.

Whilst standard plasterboard is ideal for most environments, it shouldn't be used in constantly wet conditions. For kitchens, bathrooms and similar wet areas, Gyproc Moisture Resistant , specially designed with silicone additives in the core, or Glasroc H Tilebacker , a highly water resistant Class A1, non-combustible glass reinforced gypsum board, should be used. Glasroc F MultiBoard , a glass-fibre reinforced gypsum board, is not made in the traditional way with lining paper.

Instead, the boards are strengthened with layers of glass fibre immediately below each surface. This gives them good all-round performance, a high quality durable plaster finish, and enables them to be easily bent for use on curved structures. They are excellent for semi-exposed areas, such as soffits and the like. Most common plasterboards come with the option of either tapered edge or square edge. Is that the case?

So you don't think there's a need for us to rip it off and start again? There are many difference types of plasterboards and some of them are now saying you should use white side!!

I just spoken to my plasterer friend of mine and he said it's to do with suction drying out time. I don't think there's no need to rip it off as I haven't seen any problem but do give these people a ring and see what they say.

Thanks again. Okay, I phoned knauf and got through to their technical support line. They recommend you put the white side out for plastering, but she did state that that's what they recommend for their particular boards. So, I phoned the supplier where we got ours from Newtown Supplies in Dublin and he said the same thing.

White side out for any work you need to do, i. So that's that, no need to worry Thanks for getting back, the funny thing is the grey side used to be for plastering! It would stop the confusion of having to know what side now! Can't go wrong now, white side all the time unless it's only on some plasterboards, I just wish they put it in writing on the plasterboards! Totally agree with you. I've never seen instructions on the items you buy from builders suppliers.



0コメント

  • 1000 / 1000